Make a popsicle stick craft that is suitable for tweens and teens. This type of craft is perfect for summer gatherings, day camps and VBS. You can also use scraps of pattern paper and random buttons making the craft very affordable too. If you are doing it as a short activity you will need to boil the popsicle sticks and allow them to dry ahead of time. It does take the wood craft sticks some time to dry out, especially if it is humid. If you are in a rush you can place the glasses on a tray and dry in an oven on a low temperature. If you have plenty of time you can set them out in the sun to dry.
I am loving all the adorable versions of this throw back popsicle craft from my childhood I am seeing all the web these days. When I found my stash of buttons last week, I knew I had to give this old craft a new try to incorporate these adorable buttons. The concept is rather simple. Wood can be manipulated when soaked in water since it tears down the wood fibers. So, grab some jumbo craft sticks and let’s get started.
Supplies needed for a popsicle stick bracelet:
Instructions for a popsicle stick bracelet:
- Bring a pot of water to a boil. Turn off the burner, Insert the craft sticks and let them soak for about 10-15 minutes. Put a few more in the water than you will think you need. I broke a few not being patient while trying to bend them.
- Once the sticks are soaked. Grab some proper sized glasses or plastic cups and patiently work them into the glass. Work slowly if you don’t want to end up with a lot of broken sticks like I did. It takes a little patience to get the hang of it.
- These have to set up for 24 hours to completely dry. While they are drying, go ahead and grab some acrylic paints and pattern papers to coordinate with the buttons. I used acrylic paint and some older random simple printed patterned papers.
- Here is another step you can do while waiting for the sticks to set up, On the wrong side of the patterned paper, use a pencil and a jumbo craft stick to trace it. Use a pair of scissors to cut out the paper.
- Once the bracelets have dried, gently remove them from the glasses.
- Paint the bracelets in the colors of your choice.
- Use a decoupage medium like Mod Podge and a foam brush to apply the papers to the front of the bracelets. Allow the medium to dry and gently sand the edges of the papers even with the wood. Now comes the fun part! Glue some rhinestones in the center of the stitched buttons using a tacky glue like or hot glue gun.
- Glue the buttons to the front of the bracelet and let dry.
- My bracelet’s didn’t turn out as snug as I wanted them to be, so I used some chain and jump rings to pull them a little closer in. I can still fit them over my hand without using a closure such as a lobster clasp but that still be another option. Learning from this, make sure you use a glass or cup that is slim enough if you want to skip this step!
Before you go check out all the other summer fun posts that are joining the series today. As always you can find lots of summer fun inspiration and ideas on Life Sew Savory.
365 Days of Crafts – Shared a cute Button Bracelet Project.
Cutesy Crafts – Shared fun DIY bookmark project for kids
Simple Practical Beautiful – Has a post about making friendship bracelets… FUN!
Niki’s Homemade Crafts – Fun tic tac toe game, even good for travel!
Jen Gallacher – Made gorgeous flowers. How fun to try this!
My baby girl turned 6 last week. She asked for a unicorn rainbow party. I found the perfect paper supplies at Oriental Trading Company and not only were the unicorns adorable there was a rainbow too. My inner 80’s child was so happy to combine two of my favorites and my daughters too – Rainbows and Unicorns. We went with a rainbow food theme and that was very easy to do with fresh fruits and vegetables plus a few colorful sweet treats like rainbow marshmallow pops and rainbow cupcakes. (OTC is also a client of mine and provided supplies for the party.)
The birthday girl was very pleased with her unicorn rainbow party. We decked the main table out in everything rainbow that we could think of. We listed off ideas together and she came up with a few more but we had to set some limits. Plus, there was no way I was making 8 cups of Jello in 7 colors. It was NOT happening and I have not had luck with layering colored Jello. (You might have seen layered rainbow cups on Pinterest.) Last time I tried that my was about 10 and my grandmother and I made the ugliest layered Jello fruit dessert ever.
Ideas for a unicorn rainbow party:
I made unicorn horns in rainbow colors for her friends and the Unicorn Horn tutorial can be found on the OTC Blog.
The party favors were very quick easy and in expensive. I fill paper gift bags with candy and added unicorn stickers to seal them closed.
We munched on rainbow foods. Some of the foods were healthy and some were not, but they sure were delicious.
And best of all the kids were able to run around with rainbow colored tails and burn off some of their energy. We tossed hula hoops around traffic cones and had craft time.
With leftover colored sand from last years party we made sand art in little star shaped keychains. The sand art was really the favorite craft for the kids. If you have the opportunity to have it at a party I highly recommend it.
Bracelets were made with pony beads and are always a hit.
We even colored in rainbows on a rainbow printable.
All the party supplies and other tutorials can be found on the Oriental Trading company site.
A sit upon is a girl scout craft tradition. I am not sure when the girl scout craft started but I know it has been around for over 40 years because I remember my older cousin making one at camp and teaching me how to make one too. What is a sit-upon? They are homemade, usually waterproof pads used to protect the user’s backside from the cold and damp while “sitting upon” the ground! They are also great for sitting any where the sitting surface is hard… a Girl Scout craft tradition for camping.
The material being used on the sit upon is called Oly*Fun and it is weather friendly and water resistant. It is not meant for long term use outside. But it is perfect for using and washing off when you are finished and it comes in 18 colors and it acts like a paper because you can cut it with scissors and does not fray. It is similar to a fabric because it can be sewn and washed. Like the best of both worlds.
If you would like to see more Girl Scout Crafts click on the link at the bottom and it will take you to another site loaded with ideas.
Materials for a Sit Upon – girl scout craft:
- Olyfun (your favorite colors)
- Measuring Tape or Ruler
- Needle and thread or embroidery floss (optional)
- Sewing Machine and coordinating thread
Instructions for Sit Upon – girl scout craft:
- Draw a shape for the top of the sit upon on the Olyfun fabric. We free handed the shapes then cut the shape out and set it a side.
- Cut enough Olyfun to cover the cushion on all sides with an extra two inches all around. The cushions use were 15×17 so I cut 17×19.
- If you are going to add embellishments sew them on by hand now or with sewing machine.
- Fold the material in half and sew up two sides. You can leave the seams on the outside or you can flip it inside out and the seams will be on the inside.
- Cut strips of Olyfun for straps. I cut them 4 inches wide and folded them in half for extra strength Insert the cushion into the opening.
- Insert the strapping and pin in place if needed. Sew the opening closed and trim off any excess material.
Enjoy your sit upon and be part of the girl scout tradition.
Make personalized water bottles as end of the season teammate gifts. As the proud new owner of a Cricut cutting machine, I decided my first project would be something simple. I tried my hand at Cricut permanent vinyl. (Needs to be cured 24 hours.) The gifts were for 5-7 year olds so I used a sans serif font that is easy to read. You can pick from all sorts of fonts to use. I cleaned the outside of the water-bottles with a cotton ball and rubbing alcohol. Not sure why but I wanted to make sure the vinyl had a very clean surface for adherence.
This video will help you learn how to use the Cricut. How to Cricut with Cricut Explore Air Video
Materials to make the teammate gifts:
Instructions to make teammate gifts:
- Follow the manufacturers directions on cutting vinyl. I would tell you how but I think they do a much better job. Once I have a few more projects under my belt I will write my own.
- Weed the design by peeling off all of the pieces of the design that we are not being used.
- I used transfer tape to pick up the design and move it to the surface of the water bottles.
- Smooth the letters down with a Cricut tool, an old credit card, back of a spoon or even your fingernail.
- Lift of the transfer tape. If you missed a spot smooth it over again. Repeat for each bottle you need.
You can find all sorts of other ideas on their website too. See all the Free Projects in Cricut Design Space I purchased the water bottles at the dollar store. If they are not in stock you can order them online too. There you have it – teammate gifts using the Cricut.
Join the Cricut affiliate program!
Make an easy shamrock hair clip using Olyfun and Stickles. If you can draw a heart you can make this project. Yes, you can draw a heart and it is okay if it turns out a little wonky. It is handmade after all. Plus, in all likelihood your child will be wearing it and they really don’t notice if things are not perfect. Also you could make this a pin to wear on clothes or a backpack.
Oly*Fun is available by the 12×12 sheet in the general craft isle at most big box stores. You can find it on the bolt in the fabric section. You can use any fabric glue for Oly*Fun. I like to use the Cool Tool Glue gun. It is low temp and does not burn my fingers or melt through the material. It is also safe for kids to use.
Materials for easy shamrock hair clip:
- Olyfun 12×12 craft sheets in Pine, Clover and Kiwi.
- Adtech Cool Tool Glue Gun and Glue sticks
- Stickles or glitter glue
- Hair clip
Instructions for easy shamrock hair clip:
- Cut three hearts in small medium and large. This will give you 9 hearts, three of each size.
- Cut a thin strip to cover your hair clip. I wrap mine around it completely covering it.
- Glue tips together as shown in the image above. (no hot glue it will melt) (fabric glue is fine too)
- Add accents of Stickles or glitter glue around the edges in a thin line. Allow the glitter glue to dry or you will have a mess. You can speed up drying with a cool temperature hair dryer. DO not use heat or you can melt the Olyfun.
- Glue the hair clip to the back of a heart. Leave room for the strip to cover the clip.
- Cover the hair clip with a strip of Olyfun. Secure the strip with glue. Allow to dry.
- Glue the stacked hearts on the clip as shown below.
Color sort busy activity for children in rainbow colors and in neutrals can both be made in 15 minutes or less. I came up with the popsicle shape, cut, sewed, colored and labeled all 10 colors in 32 minutes from concept, gathering materials, to completion. You can do yours in 15 minutes and make half or take a half hour and make them all. The materials list is very short. The activity will keep little ones busy and it can help them learn too. I colored the bottom of the craft sticks solid. This is to help them learn to match their colors and I also wrote the name on it for when they are ready to learn sounds and letters. The popsicle sticks can also be used for creative play.
OlyFun can be purchased in the craft isle at most big box craft stores in sheets or craft packs. It is also available via bolt in the fabric section. I really like this material because it dos not fray so you can treat it like paper or fabric.
Materials for Color Sort Busy Activity for Children:
- OlyFun craft sheet package in 12×12 assorted colors
- sewing machine and thread or fabric glue or glue gun (your choice)
- craft sticks
Instructions for Color Sort Busy Activity for Children:
- Draw a popsicle shape out on the Olyfun or freehand cut the shape. Cut two of each shape for popsicle. Repeat for each color.
- Sew or glue the shapes along the outer edge. Repeat for each color.
- Lable the popsicle stick with corresponding color. Use a marker to color in bottom half with corresponding color. Repeat for each color.
Create a Valentine heart banner with Olyfun. The flag is super easy to make because the material does not fray and cuts like butter. I used a heart die cut from Sizzix. You can layer up to 4 layers of the material over the die but I like to do two at a time. To adhere the fabric together I used Fabri-Tac glue. If you have a low temp glue gun you can use that as well. If you have a sewing machine that is also an option. The 12×12 OlyFun sheets can be found in most craft stores or big box stores with a craft department. If they don’t have the sheets they might have it by the bolt. Either way it is pretty inexpensive . I used my sewing machine to make a quick straight line across the top. You could hand sew or use glue. I might go back and ass some glitter and more hand detailing. But considering this is supposed to be a quick craft I did not. This piece was actually made in 10 minutes including drying time. The fabric glue dries super fast. Last minute I added buttons in coordinating colors. The flag needed a little pop. if you do not have a die cut machine you can hand cut the hearts.
I’m excited to be participating in the Valentine edition of Craft Lightening sponsored by The Country Chic Cottage, 30 Minute Crafts, and 100 Directions.
Material for Valentine heart flag with Olyfun:
Valentine heart flag with Olyfun Instructions:
- Place die on machine and add two layers Oly*Fun. Run through the machine. Remove hearts and repeat as many times ass needed for your flag.
- Glue the two layers together for each heart and then glue onto the black 12×12 sheet. Let a few hearts go off the edge. Trim off the excess.
- Cut the slate grey sheet of Oly*fun in half. Fold over and sew on the top edge of the Black 12×12 sheet.
- Glue on the yarn and buttons.
- ENJOY and
easy sew tote tutorial – make a boys water bottle sling using Oly-Fun
Easy sew totes are perfect for a kid on the go. My kids are a pretty active and as a family we are always on the on the go. Being on the go with kids means that someone is always hungry or thirsty. One way I have tried to teach the kids independence and individual responsibility is to have them prepare their own snacks and drinks. I made each kid a sling that will hold a refillable water bottle and a small snack and maybe a piece of gum or two. The kids like them and it is one less task I have to manage. They know that at the 5 minute warning their bags need to be pack or they go without. It might sound strict but I hear so much less complaining than before.
The material I use is Oly*Fun from Fairfield.
Directions to make the easy sew tote:
Cut a piece of the Oly-Fun material to 9×5.
Sew three of the four edges together with a 1/4 seem allowance.
Turn bag inside out.
Sew a diagonal seam on each side. This will allow the bag to sit level and give room for the snacks.
Cut a 1 x 12 inch strip. No need to cut on the bias to create the trim. The material does not fray.
To create the straps cut a strip that is 1 inch wide – I measured my son for the length.
Fold the material into thirds and sew closed.
My son also requested hoops to hook on his keys and his whistle. I used the left over strap piece to make this.
Sew the straps inside of the pouch. I make a square because I think it is extra durable.
Since it was such and easy sew tote. I made my daughter one in less than a half hour after making my first one.